The composite-materials industry is advancing rapidly. It attracts substantial investment because it has found applications in many fields, including construction, a particularly broad and profitable sector.
Glass-fiber products have the following properties:
Entrepreneurs who want to start their own business can manufacture these products at their own facility. Our company helps launch it. We handle equipment delivery, installation, commissioning, employee training, and provision of all relevant documentation.
We consider the following areas to be the most promising.
Our production lines can manufacture products in various diameters, either coiled or cut to specified lengths. In addition to the benefits mentioned above, composite rebar is also flexible. This property can be decisive for buyers choosing a construction material.
A highly profitable business in a promising, in-demand, and growing market niche, including a complete set of reliable equipment, an automated line for producing BFRP and GFRP rebar, a machine, and advanced production technology.
profitability from 90%
payback period from 1 month
staff 1-2 people
The production of high-quality rebar that meets all GOST requirements depends on the use of proven and certified technology developed by professionals. Our company has its own laboratory specializing in composite-materials research.
The research laboratory at our company is headed by Pavel Vyacheslavovich Nikolaev.
- Doctor of Chemical Sciences and professor at the Department of Chemistry and Technology of High-Molecular Compounds at Ivanovo State University of Chemistry and Technology (ISUCT).
Here is how Pavel Vyacheslavovich describes it:
Since 1973, my research interests have included epoxy oligomers and composite materials based on them. Since 2012, I have headed the laboratory of the research and manufacturing company, Ivanovo Mechanical Plant. Building-materials production is a major responsibility: people health and even lives are at stake, so technology must be handled with the utmost care.
Running the laboratory required applying the knowledge and experience I accumulated over more than 40 years of scientific work. Rebar quality, high productivity, and environmentally responsible production are the laboratory technology development priorities.
Learn more about our laboratory on the Our laboratory page
Our own research laboratory, combined with many years of research experience, ensures that our partners receive high-quality, certified technology that meets the strictest technical-regulation requirements.
Call us now and we will explain how to produce high-quality composite rebar.
Interchangeable forming dies make it possible to produce profiles with the required cross-section. Profiles may be manufactured in various colors.
profitability from 90%
payback period from 1 month
staff 1–2 people
To produce a high-quality composite fiberglass profile that meets all GOST requirements, it is essential to use a proven and certified technology developed by professionals. Our company has its own laboratory specializing in research and development of composite materials.
The research laboratory at our plant is headed by Pavel Vyacheslavovich Nikolayev.
- He is a Doctor of Chemical Sciences and Professor of the Department of Chemistry and Technology of High-Molecular Compounds at Ivanovo State University of Chemistry and Technology (ИГХТУ).
Pavel Vyacheslavovich describes his work as follows:
Since 1973, my research interests have included epoxy oligomers and composite materials based on them. Since 2012, I have headed the laboratory of the research and production enterprise Ivanovo Mechanical Plant. Building-materials production is a major responsibility: people's health and even lives are at stake, so the technology must be approached with due care.
The laboratory relies on the knowledge and experience I have accumulated over more than 40 years of scientific work. Rebar quality, high productivity, and environmentally responsible production are the laboratory's main areas of technology development.
Learn more about our laboratory on the Our Laboratory page
Our own research laboratory, combined with many years of research experience, ensures that our partners receive a high-quality, certified technology meeting the strictest technical-regulation requirements.
Call us now and we will explain how to produce the highest-quality composite fiberglass profiles.
GFRP reinforcing mesh used in foundations, floor screeds, brickwork, bridge construction, and road construction has several parameters, including mesh opening size, sheet width, and rebar thickness. Our equipment allows these values to be adjusted.
We manufacture machines in four configurations that differ in line width and maximum bar thickness:
A 1 m line can produce mesh of any width from 0.5 to 1 m; a 2 m line can produce mesh from 0.5 to 2 m wide.
By changing the line settings, the mesh opening size can be varied from 50 to 200 mm in any combination.
Additional differences in equipment design depend on the method used to weave the mesh bars:
The second mesh-weaving option provides additional strength; this modification costs RUB 300,000 more.
profitability from 90%
payback period from 1 month
staff 1–2 people
Producing high-quality mesh that meets all GOST requirements depends on using proven, certified technology developed by professionals. Our company has its own laboratory specialising in composite-materials research and development.
Our scientific laboratory is headed by Pavel Nikolaev.
— Doctor of Chemical Sciences and professor at the Department of Chemistry and Technology of High-Molecular Compounds at Ivanovo State University of Chemistry and Technology (ISUCT).
This is how Pavel Nikolaev describes it:
Since 1973, my scientific interests have focused on epoxy oligomers and composite materials based on them. Since 2012, I have headed the laboratory of the research and production company “Ivanovo Mechanical Plant”. Building-material production is a major responsibility: people’s health and even lives are at stake, so technology must never be treated carelessly.
Running the laboratory required applying the knowledge and experience I had accumulated over more than 40 years of scientific work. Rebar quality, high output and environmentally responsible production are the laboratory’s main technology-development priorities.
Learn more about our laboratory on the page — Our laboratory
Our own scientific laboratory, combined with many years of research experience, ensures that our partners receive high-quality, certified technology that meets the strictest technical-regulation requirements.
Call us now and we will explain how to produce high-quality GFRP reinforcing mesh.
GFRP grating is attracting growing attention from operators of car washes, water centers, manholes, stormwater channels, walkways, paths and other facilities. Compared with metal alternatives, these products offer exceptional durability.
The standard size of a finished plastic grating panel is 1200 × 3600 × 38 mm, with a 30 × 30 mm mesh opening. GRP pultruded grating is a lightweight, durable, strong and cost-effective modern building material. The technology can produce GFRP grating with smooth or concave surfaces, sand on the bars, or smooth and textured (sand-finished) closed surfaces for improved slip resistance.
profitability from 90%
payback period from 2 months
staff 2 people
Manufacturing FRP grating is not a complex process, but the technology must be followed to achieve a high-quality result. We provide the technology for producing composite grating and detailed operator training free of charge. This enables you to produce a high-quality product ready for sale from the first days of operation.
The primary material used to manufacture FRP grating is fiberglass, which serves as the main reinforcing material. The second component is plastic. This may be phenolic resin, one of two types of polyester resin, or vinyl ester resin.
At the first stage, fiberglass is placed into the prepared mold on the molding table to give the product strength and reliability. At the second stage, polymer is poured into the mold. Dyes can be used to give the polymer any color. An additional production step may be the application of quartz sand to the mold surface to give the FRP grating a slip-resistant finish.
Call us now and we will explain how to produce high-quality FRP grating.
A complete equipment package for EPS foam production, cutting and recycling.
EPS foam offers high thermal and acoustic insulation performance. This product remains in demand because of its relatively low cost, durability and high performance. That is why most builders are not willing to replace it with anything else.
Applications include EPS insulation boards, permanent EPS formwork for cast-in-place construction, architectural foam decoration, pipe insulation shells and EPS granules. This is a profitable, reliable business with strong earning potential. Take action — your success is within reach! The raw material is expandable polystyrene (PSV; international designation: EPS). Equipment output ranges from 50 m³ of EPS foam with a density of 11 to 35 kg/m³ per shift, in any thickness. Required workshop area: 100–150 m².
profitability up to 50%
payback period from 3 months
staff 3 people
Call us now at 8 (800) 550-39-50 and we will tell you how to produce high-quality EPS foam (polystyrene).
A complete equipment package for producing fiber and cutting and shredding fiberglass or any textile waste.
Fiber has been highly valued by concrete plant owners because adding it to the mix substantially improves the quality of finished products: it increases strength, prevents cracking, and minimizes chipping –
The machine has a feed unit consisting of two rubber rollers pressed against each other to feed raw material to the cutting blades. The guillotine-type blades are driven by a 3 kW electric motor. Force is transmitted through gears, ensuring reliable and durable operation. The machines can also process fiberglass and waste from textile and other industries.
Profitability: up to 85%
Payback period: from 2 months
Staff: 1 person
Length, width, height: 1,300 × 900 × 1,300 mm.
A 3 × 3 m room is sufficient to accommodate the fiber production machine.
Mains voltage: 380 V.
Power consumption: 4 kW/h
The machine offers high energy efficiency.
diameter 1 cm: 70–100 kg/hour
diameter 3–5 cm: 140–200 kg/hour
diameter 5–7 cm: 350–400 kg/hour
diameter 7–10 cm: 400–600 kg/hour
Monthly fiber output per shift: up to 125 tons
Adjustable cutting length: 1–100 mm.
Effective cutting length: 220 mm.
Cut thickness: 5–40 mm.
See the technical documentation for details on adjusting the length.
One operator is sufficient to operate the line.
Our specialists train operators.
The machine is supplied with complete technical documentation.
Equipment warranty: 3 years.
Warranty and post-warranty service.
Operating length: 3,000,000 linear meters of finished product. The equipment is reliable, with a proven service life of 10 years without major repairs.
